P2R Throttle Body Gasket & P2R Throttle Body Spacer

KDUB-FODATAZZ · 10-29-2007, 11:49 PM

HOW HARD OF AN INSTALL IS THIS? ON A ONE TO TEN SCALE? AND WOULD U RECCOMMEND THAT I JUST TAKE IT TO A SHOP?

se7engen_ride · 10-29-2007, 11:50 PM

its not that hard to install. use the search button and look for a DIY on installing a p2r TB spacer and gaskets.

seseoppa · 10-30-2007, 09:16 AM

^^ It's not that hard at all. Of course having the right tools make it easier.

NIGHTHAWKSI · 10-30-2007, 09:38 AM

with the correct tools you should be done in ~15 minutes

galaxygrey13 · 10-30-2007, 09:51 AM

I have no prior experience and I followed the DIY on here and completed it in about 20 minutes and ate my piece of cake in between there.

k20beast · 10-30-2007, 10:35 AM

its very easy to install...and i love mine

**dentrecords** · 10-30-2007, 10:39 AM

Please take your caps lock key off.

From the site rules http://www.8thcivic.com/forums/showthread.php?t=20021

5. Posting in all CAPS is forbidden. If the majority of a message is determined to be made up of CAPS it will be deleted and the user will be warned.

10-29-2007, 11:49 PM	#1 (permalink)
KDUB-FODATAZZ Member Join Date: Oct 2007 Location: So. Cal 805! Posts: 34 Mike iTrader: 0 / 0%	P2R Throttle Body Gasket & P2R Throttle Body Spacer HOW HARD OF AN INSTALL IS THIS? ON A ONE TO TEN SCALE? AND WOULD U RECCOMMEND THAT I JUST TAKE IT TO A SHOP?

10-30-2007, 09:38 AM	#4 (permalink)
NIGHTHAWKSI Senior Member Join Date: Nov 2006 Location: long island Posts: 9,331 iTrader: 12 / 100%	with the correct tools you should be done in ~15 minutes Last edited by NIGHTHAWKSI; 10-30-2007 at 10:38 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
P2R Power Package: Intake Manifold Gasket, TB Gasket and TB Spacer	Excelerate	Excelerate Performance	150	06-19-2008 06:16 PM
P2R Throttle Body Spacer dyno with I/H/E??	k20z3civic	Bolt-Ons And All-Motor	39	06-18-2008 08:26 PM
p2r throttle body spacer	dnbsi	Bolt-Ons And All-Motor	1	10-24-2007 12:58 AM
P2r throttle body spacer problem	polgas07	CorSport	5	09-13-2007 10:38 PM
SOLD: brand new P2R 06+Si throttle body gasket	shutter13	Engine & Transmission FS	6	09-09-2007 12:25 PM

10-29-2007, 11:50 PM	#2 (permalink)
se7engen_ride Senior Member Join Date: Jul 2005 Location: Arkansas Age: 21 Posts: 690 John iTrader: 0 / 0%	its not that hard to install. use the search button and look for a DIY on installing a p2r TB spacer and gaskets.

10-30-2007, 09:16 AM	#3 (permalink)
seseoppa Senior Member Join Date: Apr 2007 Location: Columbus, OH Posts: 374 B iTrader: 0 / 0%	^^ It's not that hard at all. Of course having the right tools make it easier.

10-30-2007, 09:51 AM	#5 (permalink)
galaxygrey13 Senior Member Join Date: Jun 2007 Location: San Diego Posts: 3,135 Ignacio iTrader: 0 / 0%	I have no prior experience and I followed the DIY on here and completed it in about 20 minutes and ate my piece of cake in between there.

10-30-2007, 10:35 AM	#6 (permalink)
k20beast Senior Member Join Date: Feb 2007 Location: clemson SC Age: 18 Posts: 1,078 zack iTrader: 2 / 100%	its very easy to install...and i love mine