How do i change my headlight bulbs???

haoshao79 · 01-24-2007, 12:26 AM

how do i change my headlight bulbs??? do i need to take out the bumper???

mO 64 StAnG 06 · 01-24-2007, 12:41 AM

Just take out the wheel well.

Jester FPS · 01-24-2007, 12:47 AM

You can get to the driver side bulbs by taking out the antifreeze coolant reservoir. The passenger side is a tighter squeeze (at least on my si).

haoshao79 · 01-24-2007, 03:13 AM

tnx for the reply...does anybody have pics??? sori i jst got my civic....

JeShUa · 01-24-2007, 03:52 AM

hm is it in the manual? I know the tail light diy is in there :]

NIGHTHAWKSI · 01-24-2007, 08:21 AM

if you have small enoguth hands you can get to them from the engine compartment...drivers side you need to pull the coolant reservoir out..and passenger side there isnt anything in the way but it is tight and a little awkward. you can also go through the wheel well and just pop out the little black clips, pull the wheel well back to get your arm in and get to them that way.

**dentrecords** · 01-24-2007, 08:24 AM

This topic has been covered numerous times before. Please try the search function.

http://www.8thcivic.com/forums/showt...ht=change+bulb
http://www.8thcivic.com/forums/showt...ight=headlight
http://www.8thcivic.com/forums/showt...ight=headlight

01-24-2007, 12:26 AM	#1 (permalink)
haoshao79 Junior Member Join Date: Jan 2007 Posts: 8 iTrader: 0 / 0%	How do i change my headlight bulbs??? how do i change my headlight bulbs??? do i need to take out the bumper???

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just got back from Autozone and was looking at blue headlight bulbs!	Civic Pride	Inside and Out	6	10-28-2006 09:07 AM
Replacing headlight bulbs	9000revs	Lighting, H.I.D.'s, & Neon	2	09-10-2006 02:32 PM
How to change licence plate bulbs	cbizz	Do It Yourself Articles	9	08-24-2006 10:20 AM
Headlight bulbs for '06 civic SI	azncowboi	Lighting, H.I.D.'s, & Neon	14	04-16-2006 12:02 AM

01-24-2007, 12:41 AM	#2 (permalink)
mO 64 StAnG 06 Senior Member Join Date: Jan 2007 Location: Wylie, Texas Age: 20 Posts: 3,983 iTrader: 0 / 0%	Just take out the wheel well.

01-24-2007, 12:47 AM	#3 (permalink)
Jester FPS Senior Member Join Date: Jul 2006 Location: California Age: 24 Posts: 1,257 iTrader: 6 / 100%	You can get to the driver side bulbs by taking out the antifreeze coolant reservoir. The passenger side is a tighter squeeze (at least on my si).

01-24-2007, 03:13 AM	#4 (permalink)
haoshao79 Junior Member Join Date: Jan 2007 Posts: 8 iTrader: 0 / 0%	tnx for the reply...does anybody have pics??? sori i jst got my civic....

01-24-2007, 03:52 AM	#5 (permalink)
JeShUa Senior Member Join Date: Apr 2006 Posts: 16,509 RIP J6 iTrader: 20 / 100%	hm is it in the manual? I know the tail light diy is in there :]

01-24-2007, 08:21 AM	#6 (permalink)
NIGHTHAWKSI Senior Member Member Join Date: Nov 2006 Location: long island Age: 23 Posts: 14,741 Ian iTrader: 13 / 100%	if you have small enoguth hands you can get to them from the engine compartment...drivers side you need to pull the coolant reservoir out..and passenger side there isnt anything in the way but it is tight and a little awkward. you can also go through the wheel well and just pop out the little black clips, pull the wheel well back to get your arm in and get to them that way.