CSX Front End Conversion - Page 6

sunny24 · 03-12-2008, 07:32 PM

what is the site to get he conversion.

mr_mezi · 03-13-2008, 12:33 AM

i dunno but i think u can try to find like parts from honda japan er somethin
oh and if u do the conversion
POST PICS =)

MosesCDN · 03-21-2008, 01:08 AM

Parts in Canada are rediculously expensive, I can hardly imagine it would make sense to do the conversion with Cdn parts... case in point, the HFP skirt pkg in the US is 1200, and here's it's 1900, even at dealership cost is 1700... it's retarded, and don't even get me started on the price of the actual car, 27000 for an Si no-nav. If you want nav, you MUST move up to the CSX, and the Si-equivalent is 33,000-ish... something you can get the equivalent of in the US for what, 10 grand less??? How does that make sense, we build the f'ers and we get jacked on the price... I'm so angry 'cause I know I'm going to have to bend over and take it when I finally get around to buying my Si.

Truplatano · 03-21-2008, 01:28 AM

Quote:

Originally Posted by sunny24

what is the site to get he conversion.

2 sites have them,

https://www.gtmotoring.com/mm5/civic-fgfd-jdm.htm

I would use this one
ShowStoppersUSA :: Award Winning Cars

FD2-R · 04-10-2008, 04:54 AM

Just incase you are looking for a csx front end I might have one for you, cuz I'm selling mine

Wierdochild89 · 04-10-2008, 11:03 PM

Is putting on the conversion parts hard? also does it come with directions on how to take stuff off etc?

jackolee · 04-11-2008, 01:26 AM

its not hard, if you know what your doing. and maybe some help

and no it doesnt come with directions.
you can get a service manual to tell you how to take parts apart

there are clips on the bottom of the car, and under the hood. and there are screws on both sides near the wheels on the bumper

wh03Lse · 04-20-2008, 11:11 AM

did you guys see this already eBay.ph: 2008 HONDA CIVIC MUGEN BODY KITS w/ FRONT GRILL BNEW (item 260217562492 end time May 04, 2008 17:57:52 PHT)

now im not sure if we can buy this but from the conversion of PHP to US dollar it comes out to ...$357.92 not including shipping haha

FD2-R · 04-20-2008, 02:34 PM

^
l
That is just a Lip Kit, just incase you are driving a USDM Civic you will need a CSX conversion to put that lip Kit on.

AzNxCsxS · 04-26-2008, 02:34 AM

so do u guys think the CSX-S could be converted into the CTR? cuz im thinking about doing it to mine if it is possible..

***BLouIsGod*** · 04-29-2008, 09:33 PM

i think just adding the lip kit to the csx makes it good enough

***ASHRAF*** · 05-03-2008, 08:58 PM

I want to get a Mugen RR front end conversion but that will just cost me tooo much, and it's not available now

but man, this **** is hottttt

Jupillam · 11-15-2008, 03:21 AM

Quote:

Originally Posted by marc-o-lishuz

That's odd... I thought all FD's had turn signals integrated into the mirrors.

Anyways, I agree - the little line on the center of the hood is a nice touch.

Quote:

This is even odder
what you think

zetarin71 · 11-15-2008, 01:06 PM

looks kool a coupe

Pwnstar · 02-22-2009, 11:44 PM

not sure if this was posted in the thread but i looked but dident see it, what is needed to convert the rear to a CSX? just the trunk and tail lights?

Lilkrayzie36 · 03-01-2009, 04:17 PM

ok. so the jdm front end is only for the 4 door . does the csx front end fit the coupe? help someone

xheartcore_boyx · 03-01-2009, 04:26 PM

Quote:

Originally Posted by Pwnstar

not sure if this was posted in the thread but i looked but dident see it, what is needed to convert the rear to a CSX? just the trunk and tail lights?

Yes

Quote:

Originally Posted by Lilkrayzie36

ok. so the jdm front end is only for the 4 door . does the csx front end fit the coupe? help someone

No

Fawkin_D · 03-20-2009, 10:53 AM

i just contacted GTMotoring and they offer both CSX and CTR conversions both interior and exterior both estimated around 20k all together

04-29-2008, 09:33 PM	#111 (permalink)
*BLouIsGod* Cobb self-tuned Join Date: Sep 2005 Location: Jax Beach, FL Age: 30 Posts: 2,957 Brad iTrader: 10 / 100%	i think just adding the lip kit to the csx makes it good enough __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.8thcivic.com/forums/exterior-style-mods/28848-csx-front-end-conversion.html
Posted By	For	Type	Date
CSX Front End Conversion - Page 5 - 8th Generation Honda Civic Forum	This thread	Refback	02-20-2008 07:36 AM
CSX Front End Conversion - 8th Generation Honda Civic Forum	This thread	Refback	01-02-2008 07:08 PM
CSX Front End Conversion - Page 9 - 8th Generation Honda Civic Forum	This thread	Refback	12-09-2007 09:34 AM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dumb Laws	C2i0v0i1c	Water Cooler	66	09-10-2009 03:01 AM
Mugen CSX front and side spoilers on US Si Sedan???	playaction	Inside and Out	2	01-29-2007 08:58 AM
2006 Civic with 04 TL front and rear wheel conversion!!!!!	clver	Civic Coupe And Sedan	25	12-23-2006 02:53 AM
pop in the front end	rrsi_rotasubzero	Civic SI	3	09-12-2006 02:13 AM
CSX front end on SI?	06SILVERSI	Garage	4	09-02-2006 09:26 PM

03-12-2008, 07:32 PM	#101 (permalink)
sunny24 Junior Member Join Date: Mar 2008 Posts: 2 iTrader: 0 / 0%	what is the site to get he conversion.

03-13-2008, 12:33 AM	#102 (permalink)
mr_mezi Senior Member Join Date: Feb 2008 Location: NOLA! Posts: 202 Bobby iTrader: 0 / 0%	i dunno but i think u can try to find like parts from honda japan er somethin oh and if u do the conversion POST PICS =)

03-21-2008, 01:08 AM	#103 (permalink)
MosesCDN Member Join Date: Nov 2007 Posts: 40 iTrader: 0 / 0%	Parts in Canada are rediculously expensive, I can hardly imagine it would make sense to do the conversion with Cdn parts... case in point, the HFP skirt pkg in the US is 1200, and here's it's 1900, even at dealership cost is 1700... it's retarded, and don't even get me started on the price of the actual car, 27000 for an Si no-nav. If you want nav, you MUST move up to the CSX, and the Si-equivalent is 33,000-ish... something you can get the equivalent of in the US for what, 10 grand less??? How does that make sense, we build the f'ers and we get jacked on the price... I'm so angry 'cause I know I'm going to have to bend over and take it when I finally get around to buying my Si.

04-10-2008, 04:54 AM	#105 (permalink)
FD2-R Senior Member Join Date: Jan 2008 Location: BC,CA Posts: 173 iTrader: 0 / 0%	Just incase you are looking for a csx front end I might have one for you, cuz I'm selling mine

04-10-2008, 11:03 PM	#106 (permalink)
Wierdochild89 Senior Member Join Date: Apr 2007 Posts: 584 iTrader: 0 / 0%	Is putting on the conversion parts hard? also does it come with directions on how to take stuff off etc?

04-11-2008, 01:26 AM	#107 (permalink)
jackolee Senior Member Join Date: Jun 2007 Location: Tennessee Age: 21 Posts: 12,821 iTrader: 3 / 100%	its not hard, if you know what your doing. and maybe some help and no it doesnt come with directions. you can get a service manual to tell you how to take parts apart there are clips on the bottom of the car, and under the hood. and there are screws on both sides near the wheels on the bumper

04-20-2008, 11:11 AM	#108 (permalink)
wh03Lse Member Join Date: Dec 2007 Location: OC Posts: 95 iTrader: 0 / 0%	did you guys see this already eBay.ph: 2008 HONDA CIVIC MUGEN BODY KITS w/ FRONT GRILL BNEW (item 260217562492 end time May 04, 2008 17:57:52 PHT) now im not sure if we can buy this but from the conversion of PHP to US dollar it comes out to ...$357.92 not including shipping haha

04-20-2008, 02:34 PM	#109 (permalink)
FD2-R Senior Member Join Date: Jan 2008 Location: BC,CA Posts: 173 iTrader: 0 / 0%	^ l That is just a Lip Kit, just incase you are driving a USDM Civic you will need a CSX conversion to put that lip Kit on.

04-26-2008, 02:34 AM	#110 (permalink)
AzNxCsxS Senior Member Join Date: Apr 2008 Location: Edmonton,AB Posts: 169 iTrader: 0 / 0%	so do u guys think the CSX-S could be converted into the CTR? cuz im thinking about doing it to mine if it is possible..

05-03-2008, 08:58 PM	#112 (permalink)
*ASHRAF* S300DY, LIKE A BAOSS! Join Date: Apr 2008 Location: Houston, TX Posts: 15,282 Name: Ashraf (AJ) iTrader: 16 / 100%	I want to get a Mugen RR front end conversion but that will just cost me tooo much, and it's not available now but man, this **** is hottttt

11-15-2008, 01:06 PM	#114 (permalink)
zetarin71 Senior Member Member Join Date: Jul 2008 Location: fontana Posts: 2,318 jose iTrader: 1 / 100%	looks kool a coupe

02-22-2009, 11:44 PM	#115 (permalink)
Pwnstar Senior Member Join Date: Feb 2009 Location: Uniontown, PA Posts: 342 iTrader: 1 / 100%	not sure if this was posted in the thread but i looked but dident see it, what is needed to convert the rear to a CSX? just the trunk and tail lights?

03-01-2009, 04:17 PM	#116 (permalink)
Lilkrayzie36 Junior Member Join Date: Apr 2008 Location: Los Angeles Posts: 13 Martin iTrader: 0 / 0%	ok. so the jdm front end is only for the 4 door . does the csx front end fit the coupe? help someone

03-20-2009, 10:53 AM	#118 (permalink)
Fawkin_D Senior Member Join Date: Oct 2007 Posts: 173 iTrader: 0 / 0%	i just contacted GTMotoring and they offer both CSX and CTR conversions both interior and exterior both estimated around 20k all together