BULB/Lamp Replacement Guide =) - Page 5

itrgtr · 04-24-2008, 12:59 AM

Quote:

Originally Posted by monochrome.fav

whats the stock wattage on the 9006 and 9005 oem bulbs? i dont wanna just get anything and fry the wiring or short circuit the car :/

would like to know as well. i may have missed it but i didn't see if anyone provided an answer. thanks

mora87 · 04-30-2008, 08:39 PM

Any one else have problems with Super Bright LEDs bulbs? Mine seem to shorted out my housing. They come on when they want too, I switched out the bulbs and it still does the same thing.

tda1337 · 04-30-2008, 09:08 PM

its a solder joint problem, there is a DIY fix on 8thcivic for that
look it up!

STOCK WATTAGE:
54 Watts 9006 (for our car)
64 Watts 9005 (again our car)

good replacement for those would be HIRs running at 55W and 65W respectively (9012 and 9011) but 2-3x the output!

onefreshsi · 05-06-2008, 01:06 PM

you guys should look at superbrightleds.com they got the best stuff and the shit is the brightes i ever seen...

tda1337 · 05-06-2008, 01:28 PM

onefresh, thats cause u have yet to see everything lol
LED guru here, if u want the best and the brightest on the market (or are excellent with a soldering iron and math) come see me, ill lead u the right direction, which is actually RARELY to superbrightleds.com lol
generally its to V-leds.com
or to besthongkong.com for 5 W leds (regulators and resistors can be found at allelectronics.com dirt cheap and brand new!)
:-P

Zephbane · 05-06-2008, 02:15 PM

There's some conflict with the Front Turn Signal bulb numbers. The OP states 3457. But Sylvania says its 3357 for the Civic 2dr.

Confirmation?

whitecivicsi · 05-06-2008, 02:24 PM

3357 and 3457 are basically identical bulbs if i'm not mistaken.

Zephbane · 05-06-2008, 02:34 PM

good to hear :) thanks whitey :)

tda1337 · 05-06-2008, 04:09 PM

they are, difference i believe is color lol if its not that its the height and width of the bulb area
one of the 2 lol

***BLouIsGod*** · 05-22-2008, 05:42 PM

its brand differences usually

mora87 · 05-22-2008, 11:30 PM

Quote:

Originally Posted by tda1337

its a solder joint problem, there is a DIY fix on 8thcivic for that
look it up!

STOCK WATTAGE:
54 Watts 9006 (for our car)
64 Watts 9005 (again our car)

good replacement for those would be HIRs running at 55W and 65W respectively (9012 and 9011) but 2-3x the output!

Anyone know where this thread is at for the solder joint? I still can't find it, been searching

tda1337 · 05-23-2008, 11:20 PM

i dont remember
ill look in the am for ya

rezbak · 05-28-2008, 12:49 AM

if you replace the low beam or high beam 12volts with a higher wattage is it going to fry the wiring harness??

Does it cover by the warranty?

j-bo · 06-02-2008, 12:03 PM

decided not right thread.

05-22-2008, 05:42 PM	#90 (permalink)
*BLouIsGod* i-VTEC your Mom Join Date: Sep 2005 Location: Jacksonville Beach, Florida Age: 28 Posts: 1,566 Brad iTrader: 3 / 100%	its brand differences usually __________________ 2008 ASM FA5 w/ Navi and Summer Tires

06-02-2008, 12:03 PM	#94 (permalink)
j-bo Member Join Date: Apr 2007 Posts: 88 iTrader: 0 / 0%	decided not right thread. Last edited by j-bo; 06-02-2008 at 12:06 PM.

LinkBacks (?) LinkBack to this Thread: http://www.8thcivic.com/forums/lighting-h-i-d-s-neon/10184-bulb-lamp-replacement-guide.html
Posted By	For	Type	Date
BULB/Lamp Replacement Guide =) - Page 5 - 8th Generation Honda Civic Forum	This thread	Refback	12-09-2007 10:41 PM
BULB/Lamp Replacement Guide =) - Page 4 - 8th Generation Honda Civic Forum	This thread	Refback	12-06-2007 04:22 AM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K&N replacement filter	H3DTRNR	Forced Induction And Nitrous	4	09-16-2007 01:02 AM
2006 Civic Rear Speaker Install Guide	webby	Audio	14	06-13-2007 11:04 AM
Wiper Blades Replacement	monkey323i	CorSport	4	07-02-2006 09:02 PM
GUIDE: 7thGen Nitrouse FAQ!	Paradoxblue	Forced Induction And Nitrous	0	04-24-2006 10:34 AM
gas cap replacement?	aznboi04k	Inside and Out	3	04-06-2006 11:55 AM

04-30-2008, 08:39 PM	#82 (permalink)
mora87 Junior Member Join Date: Jan 2008 Location: Texas Posts: 21 Salvador iTrader: 0 / 0%	Any one else have problems with Super Bright LEDs bulbs? Mine seem to shorted out my housing. They come on when they want too, I switched out the bulbs and it still does the same thing.

04-30-2008, 09:08 PM	#83 (permalink)
tda1337 Senior Member Join Date: Oct 2007 Location: Waterbury, CT Posts: 668 Rick iTrader: 0 / 0%	its a solder joint problem, there is a DIY fix on 8thcivic for that look it up! STOCK WATTAGE: 54 Watts 9006 (for our car) 64 Watts 9005 (again our car) good replacement for those would be HIRs running at 55W and 65W respectively (9012 and 9011) but 2-3x the output!

05-06-2008, 01:06 PM	#84 (permalink)
onefreshsi Member Join Date: Apr 2008 Location: dix hills Posts: 34 matt iTrader: 0 / 0%	you guys should look at superbrightleds.com they got the best stuff and the shit is the brightes i ever seen...

05-06-2008, 01:28 PM	#85 (permalink)
tda1337 Senior Member Join Date: Oct 2007 Location: Waterbury, CT Posts: 668 Rick iTrader: 0 / 0%	onefresh, thats cause u have yet to see everything lol LED guru here, if u want the best and the brightest on the market (or are excellent with a soldering iron and math) come see me, ill lead u the right direction, which is actually RARELY to superbrightleds.com lol generally its to V-leds.com or to besthongkong.com for 5 W leds (regulators and resistors can be found at allelectronics.com dirt cheap and brand new!) :-P

05-06-2008, 02:15 PM	#86 (permalink)
Zephbane Senior Member Join Date: Aug 2006 Location: Dallas, Tx Posts: 155 iTrader: 1 / 100%	There's some conflict with the Front Turn Signal bulb numbers. The OP states 3457. But Sylvania says its 3357 for the Civic 2dr. Confirmation?

05-06-2008, 02:24 PM	#87 (permalink)
whitecivicsi Senior Member Join Date: Apr 2006 Posts: 2,357 iTrader: 12 / 100%	3357 and 3457 are basically identical bulbs if i'm not mistaken.

05-06-2008, 02:34 PM	#88 (permalink)
Zephbane Senior Member Join Date: Aug 2006 Location: Dallas, Tx Posts: 155 iTrader: 1 / 100%	good to hear :) thanks whitey :)

05-06-2008, 04:09 PM	#89 (permalink)
tda1337 Senior Member Join Date: Oct 2007 Location: Waterbury, CT Posts: 668 Rick iTrader: 0 / 0%	they are, difference i believe is color lol if its not that its the height and width of the bulb area one of the 2 lol

05-23-2008, 11:20 PM	#92 (permalink)
tda1337 Senior Member Join Date: Oct 2007 Location: Waterbury, CT Posts: 668 Rick iTrader: 0 / 0%	i dont remember ill look in the am for ya

05-28-2008, 12:49 AM	#93 (permalink)
rezbak Junior Member Join Date: Apr 2008 Location: west covina Posts: 7 iTrader: 0 / 0%	if you replace the low beam or high beam 12volts with a higher wattage is it going to fry the wiring harness?? Does it cover by the warranty?